End-consumer Benefits
bio/ organic , creaminess/rich feel , foam booster , foam quality , moisturizing , oil-free , velvety feeling
|
Phase |
Ingredient | Quantity (%) |
| A | Deionized Water | 59.26 |
| A | Versene™ 100XL | 0.10 |
| A | Carbopol® Aqua SF-1 Polymer | 8.00 |
| B | Sodium Hydroxide (18%) | 2.34 |
| C | Potassium Cocoate | 18.00 |
| C | Chemoxide™ CAW Surfactant | 7.50 |
| C | Euxyl® PE 9010 | 0.80 |
| C | Farmal® CC 5739 | 2.00 |
| C | Macadâmia New, #RX 3674 | 1.00 |
| C | Extrato Glicólico de Macadâmia | 1.00 |
Typical Properties
- Appearance: Low viscosity amber liquid
- pH: 8.8 – 9.5
- Viscosity: 1,800 – 2,400 mPa•s
- Yield Value: 100 – 150 dyn/cm²
- Turbidity: 0 – 10 NTU
- Stability: Passed 2 months at 45 °C (ongoing) & 50 °C, Passed 5 freeze/thaw cycles
- Carbopol® Aqua SF-1 Polymer: 2.4 %TS
- Soap / Surfactant: 9.45 % TS/Actives
Description
Experience the sensory of traditional bar soap in the form of a body wash with this rich shower formulation. The creamy texture of this liquid soap will easily build lather for an all-over feeling of clean and a velvet afterfeel. Carbopol® Aqua SF-1 Polymer provides excellent viscosity and long flow rheology. The surfactant system is based on the coconut derived Potassium Cocoate, which contains glycerin and acts as a natural moisturizing agent. Chemoxide™ CAW Surfactant promotes creamy flash foaming characteristics.
Procedure
- PART A: Solubilize Tetrasodium EDTA in Deionized Water in a suitable mixing vessel.
- Add Carbopol® Aqua SF-1 Polymer and mix until uniform.
- PART B: Add Sodium Hydroxide (18% solution) to batch with mixing to neutralize. Check pH (should be 9.0 – 9.5). Adjust with additional Sodium Hydroxide as needed. Mix until uniform.
- PART C: Add ingredients to batch one at a time, in order with mixing. Mix batch until uniform