Gentle PEG-Free Emulsion for Baby Wipe

Category

Skin care (Facial care, Facial cleansing, Body care, Baby care) >> Baby care >> Wet wipe lotions

Supplier

Lubrizol

End consumer benefits

  • alcohol-free
  • bio/ organic
  • mildness
  • moisturizing
  • PEG-free
  • softness
  • vegetal origin

Description

This mild, PEG-free emulsion is a starting point formula for wipes and is designed to clean and condition the sensitive skin of babies. Glucate™ DOEmulsifier, a vegetable-derived emulsifier, is combined with Pemulen™ TR-2 Polymer and a low amount of Coco-Glucoside to afford efficient costabilization. Schercemol™ 1818 Ester, also derived from vegetable sources, provides emolliency and a soft afterfeel to this emulsion.

Ingredients

Phase

INCI Name

Quantity (%)

A

Deionized Water

39.36

Glycerin

5.00

B

Schercemol™ 1818 Ester

2.00

Pemulen™ TR-2 Polymer

0.12

Glucate™ SS Emulsifier

0.20

C

Sodium Hydroxide (18%)

0.12

D

Coco-Glucoside (50%)

2.00

E

(-)Alpha-Bisabolol Natural

0.20

Vitamin E Acetate

0.20

Phenonip®

0.80

Deionized Water

50.00

Properties

  • Appearance: Thin white lotion
  • pH: 6.0 – 6.5
  • Viscosity: 500 – 800 mPa.s
  • Stability: Passed 3 months @ 45 °C and RT, Passed 5 cycles freeze / thaw

Procedure

  1. PART A: Add Glycerin to Deionized Water and heat to 55-60°C.
  2. PART B: In a separate vessel, disperse Pemulen™ TR-2 Polymer into Schercemol™ 1818 Ester.
  3. When the polymer is fully dispersed add Glucate™ SS Emulsifier and heat to 55-60°C.
  4. Add PART B to PART A. Mix for 20-30 minutes to allow the polymer to swell.
  5. Homogenize batch with Ultra Turrax homogenizer at 6,000 rpm for 2 minutes.
  6. Neutralize batch with Sodium Hydroxide (18%). Mix until uniform.
  7. Add Coco-Glucoside. Mix slowly to avoid air entrapment. Begin cooling batch.
  8. Mix batch until temperature reaches 40°C.
  9. Add PART E ingredients in order to batch with mixing. Mix until uniform.
  10. Dilute with Deionized Water.

 

Поделитесь этой публикацией с коллегами и друзьями